DLL1 (Delta-like protein 1) is a single pass type I transmembrane protein of the delta/serrate/jagged family. DLL1 is a human homolog of the Notch Delta ligand and can bind and activate NOTCH1, NOTCH2 and NOTCH3 receptors.  DLL1 contains 1 DSL (delta serrate ligand) domain and 8 EGF-like domains in the extracellular region. The DSL domain is required for binding to the Notch receptors.  The EGF-like domain is often found in tandem repeat arrangements present in a large number of membrane-bound and extracellular proteins. Many of these proteins require calcium for their biological function and calcium-binding may be crucial for numerous protein-protein interactions. Six conserved core cysteines form three disulfide bridges as in non calcium-binding EGF domains with similar structures. DLL1 plays a role in mediating cell fate decisions during hematopoiesis and in cell-to-cell communication. DLL1 is required for embryonic development and maintenance of adult stem cells in many different tissues and immune systeme. The DLL1-induced Notch signaling is mediated through an intercellular communication that regulates cell lineage, cell specification, cell patterning and morphogenesis through effects on differentiation and proliferation.  DLL1 plays a role in brain development at different level, namely by regulating neuronal differentiation of neural precursor cells via cell-cell interaction. DLL1 also may play a role during muscle development. 

DLL1 (Delta-like protein 1) is a single pass type I transmembrane protein of the delta/serrate/jagged family. DLL1 is a human homolog of the Notch Delta ligand and can bind and activate NOTCH1, NOTCH2 and NOTCH3 receptors.  DLL1 contains 1 DSL (delta serrate ligand) domain and 8 EGF-like domains in the extracellular region. The DSL domain is required for binding to the Notch receptors.  The EGF-like domain is often found in tandem repeat arrangements present in a large number of membrane-bound and extracellular proteins. Many of these proteins require calcium for their biological function and calcium-binding may be crucial for numerous protein-protein interactions. Six conserved core cysteines form three disulfide bridges as in non calcium-binding EGF domains with similar structures. DLL1 plays a role in mediating cell fate decisions during hematopoiesis and in cell-to-cell communication. DLL1 is required for embryonic development and maintenance of adult stem cells in many different tissues and immune systeme. The DLL1-induced Notch signaling is mediated through an intercellular communication that regulates cell lineage, cell specification, cell patterning and morphogenesis through effects on differentiation and proliferation.  DLL1 plays a role in brain development at different level, namely by regulating neuronal differentiation of neural precursor cells via cell-cell interaction. DLL1 also may play a role during muscle development. 

 

Product Details

 

Gene Symbol: DLL1; Delta1; Delta; H-Delta-1; UNQ146/PRO172

 

NCBI Gene ID: 28514

 

Uniprot Entry: O00548

 

Construct Details: Full length human DLL1 gene is subcloned into the Lentiviral expression vector pLTC with an upstream CMV promoter and with or without a selection marker, which can be used for both transient and stable expression in mammalian cells.  It can be co-transfected with the LentiPAK DNA mix (SKU# LP-001) into HEK293 cells to produce high titer lentiviral particles. Multiple choices of a stable antibiotic selection marker are available.

 

Vector Type: pLTC or pLTC-IRES-Marker (lentiviral expression vector containing a heterologous CMV promoter +/- a selection marker, see the vector map above)

  

Gene Insert Sequence:  

ATGGGCAGTCGGTGCGCGCTGGCCCTGGCGGTGCTCTCGGCCTTGCTGTGTCAGGTCTGGAGCTCTGGGG

TGTTCGAACTGAAGCTGCAGGAGTTCGTCAACAAGAAGGGGCTGCTGGGGAACCGCAACTGCTGCCGCGG

GGGCGCGGGGCCACCGCCGTGCGCCTGCCGGACCTTCTTCCGCGTGTGCCTCAAGCACTACCAGGCCAGC

GTGTCCCCCGAGCCGCCCTGCACCTACGGCAGCGCCGTCACCCCCGTGCTGGGCGTCGACTCCTTCAGTC

TGCCCGACGGCGGGGGCGCCGACTCCGCGTTCAGCAACCCCATCCGCTTCCCCTTCGGCTTCACCTGGCC

GGGCACCTTCTCTCTGATTATTGAAGCTCTCCACACAGATTCTCCTGATGACCTCGCAACAGAAAACCCA

GAAAGACTCATCAGCCGCCTGGCCACCCAGAGGCACCTGACGGTGGGCGAGGAGTGGTCCCAGGACCTGC

ACAGCAGCGGCCGCACGGACCTCAAGTACTCCTACCGCTTCGTGTGTGACGAACACTACTACGGAGAGGG

CTGCTCCGTTTTCTGCCGTCCCCGGGACGATGCCTTCGGCCACTTCACCTGTGGGGAGCGTGGGGAGAAA

GTGTGCAACCCTGGCTGGAAAGGGCCCTACTGCACAGAGCCGATCTGCCTGCCTGGATGTGATGAGCAGC

ATGGATTTTGTGACAAACCAGGGGAATGCAAGTGCAGAGTGGGCTGGCAGGGCCGGTACTGTGACGAGTG

TATCCGCTATCCAGGCTGTCTCCATGGCACCTGCCAGCAGCCCTGGCAGTGCAACTGCCAGGAAGGCTGG

GGGGGCCTTTTCTGCAACCAGGACCTGAACTACTGCACACACCATAAGCCCTGCAAGAATGGAGCCACCT

GCACCAACACGGGCCAGGGGAGCTACACTTGCTCTTGCCGGCCTGGGTACACAGGTGCCACCTGCGAGCT

GGGGATTGACGAGTGTGACCCCAGCCCTTGTAAGAACGGAGGGAGCTGCACGGATCTCGAGAACAGCTAC

TCCTGTACCTGCCCACCCGGCTTCTACGGCAAAATCTGTGAATTGAGTGCCATGACCTGTGCGGACGGCC

CTTGCTTTAACGGGGGTCGGTGCTCAGACAGCCCCGATGGAGGGTACAGCTGCCGCTGCCCCGTGGGCTA

CTCCGGCTTCAACTGTGAGAAGAAAATTGACTACTGCAGCTCTTCACCCTGTTCTAATGGTGCCAAGTGT

GTGGACCTCGGTGATGCCTACCTGTGCCGCTGCCAGGCCGGCTTCTCGGGGAGGCACTGTGACGACAACG

TGGACGACTGCGCCTCCTCCCCGTGCGCCAACGGGGGCACCTGCCGGGATGGCGTGAACGACTTCTCCTG

CACCTGCCCGCCTGGCTACACGGGCAGGAACTGCAGTGCCCCCGTCAGCAGGTGCGAGCACGCACCCTGC

CACAATGGGGCCACCTGCCACGAGAGGGGCCACCGCTATGTGTGCGAGTGTGCCCGAGGCTACGGGGGTC

CCAACTGCCAGTTCCTGCTCCCCGAGCTGCCCCCGGGCCCAGCGGTGGTGGACCTCACTGAGAAGCTAGA

GGGCCAGGGCGGGCCATTCCCCTGGGTGGCCGTGTGCGCCGGGGTCATCCTTGTCCTCATGCTGCTGCTG

GGCTGTGCCGCTGTGGTGGTCTGCGTCCGGCTGAGGCTGCAGAAGCACCGGCCCCCAGCCGACCCCTGCC

GGGGGGAGACGGAGACCATGAACAACCTGGCCAACTGCCAGCGTGAGAAGGACATCTCAGTCAGCATCAT

CGGGGCCACGCAGATCAAGAACACCAACAAGAAGGCGGACTTCCACGGGGACCACAGCGCCGACAAGAAT

GGCTTCAAGGCCCGCTACCCAGCGGTGGACTATAACCTCGTGCAGGACCTCAAGGGTGACGACACCGCCG

TCAGGGACGCGCACAGCAAGCGTGACACCAAGTGCCAGCCCCAGGGCTCCTCAGGGGAGGAGAAGGGGAC

CCCGACCACACTCAGGGGTGGAGAAGCATCTGAAAGAAAAAGGCCGGACTCGGGCTGTTCAACTTCAAAA

GACACCAAGTACCAGTCGGTGTACGTCATATCCGAGGAGAAGGATGAGTGCGTCATAGCAACTGAGGTGT

AA

 

Formulation: Lentivector encoded and pre-packaged viral particles (typical titer 10⁶ - 10⁷ IFU/ml) in the conditional medium (serum-free) from HEK293 cells that have been transfected with the lentivector gene clone and the LentiPAK DNA mix

 

 

 

FOR RESEARCH USE ONLY. NOT FOR DIAGNOSTIC OR THERAPEUTIC USE IN HUMAN.

Important Safety Information: With the safety features in place, our lentiviral vectors and viral particles can be employed in standard Biosafety Level 2 tissue culture facilities and should be treated with the same level of caution as any other potentially infectious agent. Any investigator who purchases our lentiviral/retroviral products & services is responsible for following Biosafety Level 2 requirements on the handling of viral particles. For more information on Biosafety Level 2 agents and practices, please refer to NIH’s “Biosafety Considerations for Research with Lentiviral Vectors”.

Restriction: This product is not transferable or re-sellable.  Customer obtain no right to transfer, assign, or sublicense its use rights, or to transfer, resell, package, or otherwise distribute the product, or to use the product for the benefit of any third party or for any commercial purpose.  Customer may only use the product in compliance with applicable local, state and federal laws, regulations and rules.  Customer may not directly or indirectly use the product or allow the transfer, transmission, export or re-export of all or any part of the product in violation of any export control law or regulation of the united states or any other relevant jurisdiction.  Your use of this product constitutes acceptance of the terms of this limited use agreement.  Please refer to our “terms & conditions” for details.  If you are not willing to accept the limitation of this agreement, G&P Biosciences will accept return of the product for a full/partial refund.

 

Transduction Protocol

 

Pre-packaged lentiviral particles are most advanced gene delivery tools. Each particles contain a fully sequence verified target gene and are psudotyped with the VSV-G glycoprotein, ready for transduction into into a wide range of cell types including hard-to-transfect primary cells and non-dividing cells. They are supplied in 1-mL aliquot(s) of the serum-/antibiotic-free solution suitable for both in vitro and in vivo delivery. They are produced in HEK293 packaging cells with a typical titer of ≥10⁷ IFU/ml using our optimized LentPAK^TM packaging system. The lentiviral particles can be used to transduce subconfluent target cells. Depending on your purpose, you may choose a specific multiplicity of infection (MOI) or test a range of MOIs to determine which gives you the desired results. Transduction can be enhanced by the addition of polybrene, also known as hexadimethrine bromide (typically at 8-10 μg/ml). 

 

Quick Protocol for Transduction

 

Day 1. Seeding Target Cells

For an example, plate target cells in a 10 cm plate at a density of 1 - 5x 10⁵ cells/ml that will produce approximately 60% confluency in 24 hours.

 

Note: other size plates can also be used depending on the nature of your experiment. Adjust the reagent amount according to Table 1

 

Table 1. Seeding Density of Target Cells (1 day prior to transduction)

Vessel Type	Seeding Density	Volume of Media
10-cm dish	1 – 5 x 106	10 mL
6-well plate	0.3 – 1 x 106	2 mL/well
12-well plate	0.15 – 0.5 x 106	1 mL/well
24-well plate	0.6 – 2 x 105	0.5 mL/well
96-well plate	1 – 4 x 104	0.1 mL/well

  

Day 2. Transduction

Remove the growth media from the dish/plate prepared the day before. Replace with 1/2 volume of culture medium containing desired amount of lentiviral particles (at 2 to 20 MOI).  For example, add 4.5 mL of growth medium and 0.5 mL of Lentiviral particles, or simply add 5 mL of Lentiviral particles (for a low titer viral preparation or a high MOI transduction). Add polybrene directly to the media on the target cells at 8 μg/ml. Mix by gentle swirling.

 

Incubate at 37°C with 5% CO2 for 4 - 24 hours, then replace the transduction medium with right amount of growth medium according to table 1 (for example 10 mL for 10-cm dish). Culture the cells for 48 – 72 hours, and transduced cells are ready for downstream analyses.

 

Note: Adjust volumes accordingly for transduction of other plate types.  For example, add 1 ml of growth medium and lentiviral particle mixture for 6-well plate, 0.5 ml for 12-well and 0.25 mL for 24-well except for 96 well, in which 100 μl should be used. The change of transduction medium is often unnecessary with our pre-packaged lentiviral particles.  Simply culture cells for 3-4 days before analysis. 

 

The virus-containing media can be changed in as short as 4 hours after transduction if toxicity of the lentiviral transduction is a concern. Normally reverse transcription and genome integration of the lentivector takes place within 24-36 hours. With our ready-to-use, prepackaged lentiviral particles, the change of media is often unnecessary. The transduction process can be ongoing for 2 - 6 days without significant impact on cell growth/viability. The transduction process can also be repeated if desired. For a lentivector with a fluorescent reporter (such as GFP), FACS can be used to enrich for cells that express GFP. If it contains a drug selectable marker, follow the protocol for the particular drug. For example, puromycin selection is usually carried out at 1-10 μg/mL, depending on the target cells’ sensitivity

 

 

Important Safety Information

With the safety features in place, our lentiviral vectors and viral particles can be employed in standard Biosafety Level 2 tissue culture facilities and should be treated with the same level of caution as any other potentially infectious agent. Any investigator who purchases our lentiviral/retroviral products & services is responsible for following Biosafety Level 2 requirements on the handling of viral particles. For more information on Biosafety Level 2 agents and practices, please refer to NIH’s “Biosafety Considerations for Research with Lentiviral Vectors”.

 

 

 

 

 

FOR RESEARCH USE ONLY. NOT FOR DIAGNOSTIC OR THERAPEUTIC USE IN HUMAN.

 

 

References

 

1. Cell 67:687-699 (1991)

2. Science 268:225-232 (1995)

3. Am. J. Pathol. 154:785-794(1999)

4. Blood 95:1616-1625(2000)

5. Biochem. Biophys. Res. Commun. 276:385-389(2000) 

6.  J. Exp. Med. 194:991-1001(2001)

 

 

Additional supporting documents, including product data sheet (PDS), COA and MSDS are available upon request.

 

 

 

FOR RESEARCH USE ONLY. NOT FOR DIAGNOSTIC OR THERAPEUTIC USE IN HUMAN.

Restriction: This product is not transferable or re-sellable.  Customer obtain no right to transfer, assign, or sublicense its use rights, or to transfer, resell, package, or otherwise distribute the product, or to use the product for the benefit of any third party or for any commercial purpose.  Customer may only use the product in compliance with applicable local, state and federal laws, regulations and rules.  Customer may not directly or indirectly use the product or allow the transfer, transmission, export or re-export of all or any part of the product in violation of any export control law or regulation of the united states or any other relevant jurisdiction.  Your use of this product constitutes acceptance of the terms of this limited use agreement.  Please refer to our “terms & conditions” for details.  If you are not willing to accept the limitation of this agreement, G&P Biosciences will accept return of the product for a full/partial refund.