Human KL/Klotho Lentivirus, Full-length Gene in Lentivector, Pre-packaged Lentiviral Particles
KL (klotho) is a single-pass, type I transmembrane protein that belongs to a the Klotho subfamily of the glycosyl hydrolase 1 family. KL contains 2 glycosyl hydrolase 1 regions in the extracellular domain (ECD) and may have weak glycosidase activity towards glucuronylated steroids. However, KL lacks essential active site Glu residues at positions 239 and 872. KL can be cleaved into Klotho peptide which may be an anti-aging circulating hormone to extend life span by inhibiting insulin/IGF1 signaling. KL is detected in cortical renal tubules and soluble peptide is present in serum and cerebrospinal fluid. KL is expressed in kidney, placenta, small intestine and prostate. It is down-regulated in renal cell carcinomas, hepatocellular carcinomas, and in chronic renal failure (CRF) kidney. KL is involved in the regulation of calcium and phosphorus homeostasis by inhibiting the synthesis of active vitamin D. KL plays important roles in degenerative processes (e.g., arteriosclerosis, osteoporosis, and skin atrophy) observed in CRF. Mutations within the KL gene are associated with aging and bone loss.
Gene Symbol: KL; Klotho
NCBI Gene ID: 9365
Uniprot Entry: Q9UEF7
Construct Details: Full length human KL/Klotho gene is subcloned into the Lentiviral expression vector pLTC with an upstream CMV promoter and with or without an antibiotic selection marker, which can be used for both transient and stable expression in mammalian cells. It can be co-transfected with the LentiPAK DNA mix (SKU# LP-001) into HEK293 cells to produce high titer lentiviral particles. Multiple choices of antibiotic selection marker are available.
Vector Type: pLTC or pLTC-IRES-Marker (lentiviral expression vector containing a heterologous CMV promoter +/- a selection marker, see the vector map above)
Gene Insert Size: 3039 (bp)
Gene Insert Sequence:
ATGCCCGCCAGCGCCCCGCCGCGCCGCCCGCGGCCGCCGCCGCCGTCGCTGTCGCTGCTGCTGGTGCTGC
TGGGCCTGGGCGGCCGCCGCCTGCGTGCGGAGCCGGGCGACGGCGCGCAGACCTGGGCCCGTTTCTCGCG
GCCTCCTGCCCCCGAGGCCGCGGGCCTCTTCCAGGGCACCTTCCCCGACGGCTTCCTCTGGGCCGTGGGC
AGCGCCGCCTACCAGACCGAGGGCGGCTGGCAGCAGCACGGCAAGGGTGCGTCCATCTGGGATACGTTCA
CCCACCACCCCCTGGCACCCCCGGGAGACTCCCGGAACGCCAGTCTGCCGTTGGGCGCCCCGTCGCCGCT
GCAGCCCGCCACCGGGGACGTAGCCAGCGACAGCTACAACAACGTCTTCCGCGACACGGAGGCGCTGCGC
GAGCTCGGGGTCACTCACTACCGCTTCTCCATCTCGTGGGCGCGAGTGCTCCCCAATGGCAGCGCGGGCG
TCCCCAACCGCGAGGGGCTGCGCTACTACCGGCGCCTGCTGGAGCGGCTGCGGGAGCTGGGCGTGCAGCC
CGTGGTCACCCTGTACCACTGGGACCTGCCCCAGCGCCTGCAGGACGCCTACGGCGGCTGGGCCAACCGC
GCCCTGGCCGACCACTTCAGGGATTACGCGGAGCTCTGCTTCCGCCACTTCGGCGGTCAGGTCAAGTACT
GGATCACCATCGACAACCCCTACGTGGTGGCCTGGCACGGCTACGCCACCGGGCGCCTGGCCCCCGGCAT
CCGGGGCAGCCCGCGGCTCGGGTACCTGGTGGCGCACAACCTCCTCCTGGCTCATGCCAAAGTCTGGCAT
CTCTACAATACTTCTTTCCGTCCCACTCAGGGAGGTCAGGTGTCCATTGCCCTAAGCTCTCACTGGATCA
ATCCTCGAAGAATGACCGACCACAGCATCAAAGAATGTCAAAAATCTCTGGACTTTGTACTAGGTTGGTT
TGCCAAACCCGTATTTATTGATGGTGACTATCCCGAGAGCATGAAGAATAACCTTTCATCTATTCTGCCT
GATTTTACTGAATCTGAGAAAAAGTTCATCAAAGGAACTGCTGACTTTTTTGCTCTTTGCTTTGGACCCA
CCTTGAGTTTTCAACTTTTGGACCCTCACATGAAGTTCCGCCAATTGGAATCTCCCAACCTGAGGCAACT
GCTTTCCTGGATTGACCTTGAATTTAACCATCCTCAAATATTTATTGTGGAAAATGGCTGGTTTGTCTCA
GGGACCACCAAGAGAGATGATGCCAAATATATGTATTACCTCAAAAAGTTCATCATGGAAACCTTAAAAG
CCATCAAGCTGGATGGGGTGGATGTCATCGGGTATACCGCATGGTCCCTCATGGATGGTTTCGAGTGGCA
CAGAGGTTACAGCATCAGGCGTGGACTCTTCTATGTTGACTTTCTAAGCCAGGACAAGATGTTGTTGCCA
AAGTCTTCAGCCTTGTTCTACCAAAAGCTGATAGAGAAAAATGGCTTCCCTCCTTTACCTGAAAATCAGC
CCCTAGAAGGGACATTTCCCTGTGACTTTGCTTGGGGAGTTGTTGACAACTACATTCAAGTAGATACCAC
TCTGTCTCAGTTTACCGACCTGAATGTTTACCTGTGGGATGTCCACCACAGTAAAAGGCTTATTAAAGTG
GATGGGGTTGTGACCAAGAAGAGGAAATCCTACTGTGTTGACTTTGCTGCCATCCAGCCCCAGATCGCTT
TACTCCAGGAAATGCACGTTACACATTTTCGCTTCTCCCTGGACTGGGCCCTGATTCTCCCTCTGGGTAA
CCAGTCCCAGGTGAACCACACCATCCTGCAGTACTATCGCTGCATGGCCAGCGAGCTTGTCCGTGTCAAC
ATCACCCCAGTGGTGGCCCTGTGGCAGCCTATGGCCCCGAACCAAGGACTGCCGCGCCTCCTGGCCAGGC
AGGGCGCCTGGGAGAACCCCTACACTGCCCTGGCCTTTGCAGAGTATGCCCGACTGTGCTTTCAAGAGCT
CGGCCATCACGTCAAGCTTTGGATAACGATGAATGAGCCGTATACAAGGAATATGACATACAGTGCTGGC
CACAACCTTCTGAAGGCCCATGCCCTGGCTTGGCATGTGTACAATGAAAAGTTTAGGCATGCTCAGAATG
GGAAAATATCCATAGCCTTGCAGGCTGATTGGATAGAACCTGCCTGCCCTTTCTCCCAAAAGGACAAAGA
GGTGGCTGAGAGAGTTTTGGAATTTGACATTGGCTGGCTGGCTGAGCCCATTTTCGGCTCTGGAGATTAT
CCATGGGTGATGAGGGACTGGCTGAACCAAAGAAACAATTTTCTTCTTCCTTATTTCACTGAAGATGAAA
AAAAGCTAATCCAGGGTACCTTTGACTTTTTGGCTTTAAGCCATTATACCACCATCCTTGTAGACTCAGA
AAAAGAAGATCCAATAAAATACAATGATTACCTAGAAGTGCAAGAAATGACCGACATCACGTGGCTCAAC
TCCCCCAGTCAGGTGGCGGTAGTGCCCTGGGGGTTGCGCAAAGTGCTGAACTGGCTGAAGTTCAAGTACG
GAGACCTCCCCATGTACATAATATCCAATGGAATCGATGACGGGCTGCATGCTGAGGACGACCAGCTGAG
GGTGTATTATATGCAGAATTACATAAACGAAGCTCTCAAAGCCCACATACTGGATGGTATCAATCTTTGC
GGATACTTTGCTTATTCGTTTAACGACCGCACAGCTCCGAGGTTTGGCCTCTATCGTTATGCTGCAGATC
AGTTTGAGCCCAAGGCATCCATGAAACATTACAGGAAAATTATTGACAGCAATGGTTTCCCGGGCCCAGA
AACTCTGGAAAGATTTTGTCCAGAAGAATTCACCGTGTGTACTGAGTGCAGTTTTTTTCACACCCGAAAG
TCTTTACTGGCTTTCATAGCTTTTCTATTTTTTGCTTCTATTATTTCTCTCTCCCTTATATTTTACTACT
CGAAGAAAGGCAGAAGAAGTTACAAATAG
Formulation: pre-packaged viral particles in the conditional medium (serum-free) from HEK293 cells (typical titer 106 - 107 IFU/ml)
FOR RESEARCH USE ONLY. NOT FOR DIAGNOSTIC OR THERAPEUTIC USE IN HUMAN.
Important Safety Information: With the safety features in place, our lentiviral vectors and viral particles can be employed in standard Biosafety Level 2 tissue culture facilities and should be treated with the same level of caution as any other potentially infectious agent. Any investigator who purchases our lentiviral/retroviral products & services is responsible for following Biosafety Level 2 requirements on the handling of viral particles. For more information on Biosafety Level 2 agents and practices, please refer to NIH’s “Biosafety Considerations for Research with Lentiviral Vectors”.
Restriction: This product is not transferable or re-sellable. Customer obtain no right to transfer, assign, or sublicense its use rights, or to transfer, resell, package, or otherwise distribute the product, or to use the product for the benefit of any third party or for any commercial purpose. Customer may only use the product in compliance with applicable local, state and federal laws, regulations and rules. Customer may not directly or indirectly use the product or allow the transfer, transmission, export or re-export of all or any part of the product in violation of any export control law or regulation of the united states or any other relevant jurisdiction. Your use of this product constitutes acceptance of the terms of this limited use agreement. Please refer to our “terms & conditions” for details. If you are not willing to accept the limitation of this agreement, G&P Biosciences will accept return of the product for a full/partial refund.
Pre-packaged lentiviral particles are most advanced gene delivery tools. Each particles contain a fully sequence verified target gene and are psudotyped with the VSV-G glycoprotein, ready for transduction into into a wide range of cell types including hard-to-transfect primary cells and non-dividing cells. They are supplied in 1-mL aliquot(s) of the serum-/antibiotic-free solution suitable for both in vitro and in vivo delivery. They are produced in HEK293 packaging cells with a typical titer of ≥107 IFU/ml using our optimized LentPAKTM packaging system. The lentiviral particles can be used to transduce subconfluent target cells. Depending on your purpose, you may choose a specific multiplicity of infection (MOI) or test a range of MOIs to determine which gives you the desired results. Transduction can be enhanced by the addition of polybrene, also known as hexadimethrine bromide (typically at 8-10 μg/ml).
Quick Protocol for Transduction
Day 1. Seeding Target Cells
For an example, plate target cells in a 10 cm plate at a density of 1 - 5x 105 cells/ml that will produce approximately 60% confluency in 24 hours.
Note: other size plates can also be used depending on the nature of your experiment. Adjust the reagent amount according to Table 1
Table 1. Seeding Density of Target Cells (1 day prior to transduction)
Vessel Type |
Seeding Density |
Volume of Media |
10-cm dish |
1 – 5 x 106 |
10 mL |
6-well plate |
0.3 – 1 x 106 |
2 mL/well |
12-well plate |
0.15 – 0.5 x 106 |
1 mL/well |
24-well plate |
0.6 – 2 x 105 |
0.5 mL/well |
96-well plate |
1 – 4 x 104 |
0.1 mL/well |
Day 2. Transduction
Remove the growth media from the dish/plate prepared the day before. Replace with 1/2 volume of culture medium containing desired amount of lentiviral particles (at 2 to 20 MOI). For example, add 4.5 mL of growth medium and 0.5 mL of Lentiviral particles, or simply add 5 mL of Lentiviral particles (for a low titer viral preparation or a high MOI transduction). Add polybrene directly to the media on the target cells at 8 μg/ml. Mix by gentle swirling.
Incubate at 37°C with 5% CO2 for 4 - 24 hours, then replace the transduction medium with right amount of growth medium according to table 1 (for example 10 mL for 10-cm dish). Culture the cells for 48 – 72 hours, and transduced cells are ready for downstream analyses.
Note: Adjust volumes accordingly for transduction of other plate types. For example, add 1 ml of growth medium and lentiviral particle mixture for 6-well plate, 0.5 ml for 12-well and 0.25 mL for 24-well except for 96 well, in which 100 μl should be used. The change of transduction medium is often unnecessary with our pre-packaged lentiviral particles. Simply culture cells for 3-4 days before analysis.
The virus-containing media can be changed in as short as 4 hours after transduction if toxicity of the lentiviral transduction is a concern. Normally reverse transcription and genome integration of the lentivector takes place within 24-36 hours. With our ready-to-use, prepackaged lentiviral particles, the change of media is often unnecessary. The transduction process can be ongoing for 2 - 6 days without significant impact on cell growth/viability. The transduction process can also be repeated if desired. For a lentivector with a fluorescent reporter (such as GFP), FACS can be used to enrich for cells that express GFP. If it contains a drug selectable marker, follow the protocol for the particular drug. For example, puromycin selection is usually carried out at 1-10 μg/mL, depending on the target cells’ sensitivity
Important Safety Information
With the safety features in place, our lentiviral vectors and viral particles can be employed in standard Biosafety Level 2 tissue culture facilities and should be treated with the same level of caution as any other potentially infectious agent. Any investigator who purchases our lentiviral/retroviral products & services is responsible for following Biosafety Level 2 requirements on the handling of viral particles. For more information on Biosafety Level 2 agents and practices, please refer to NIH’s “Biosafety Considerations for Research with Lentiviral Vectors”.
The product is shipped at 4°C for immediate use or with dry ice. Upon receipt, centrifuge the vial briefly before opening. Store at –80°C or lower and the product is stable for 3 months. Avoid repeated freeze-thaw cycles.
The product should be employed in a Biosafety Level 2 tissue culture facility.
FOR RESEARCH USE ONLY. NOT FOR DIAGNOSTIC OR THERAPEUTIC USE IN HUMAN.
Additional supporting documents, including PDS, COA and MSDS are available upon request.
FOR RESEARCH USE ONLY. NOT FOR DIAGNOSTIC OR THERAPEUTIC USE IN HUMAN.